Penguin Stainless Steel and Titanium Vertical Pumps

Stainless Steel Vertical PumpPENGUIN SERIES PSS STAINLESS STEEL VERTICAL IN-TANK PUMPS are compact and simple in design, having only one moving part, yet highly efficient with proven performance. A Penguin vertical in-tank pump is corrosion-resistant and all-purpose, ideal for many OEM wet processing applications. Whether you are pumping cleaners, caustics, salt solutions, chlorinated solvents, photographic chemicals, deionized water, fatty, phosphoric, citric, or lactic acids, they can be pumped with confidence. Maximum temperature ratings are primarily dependent on the elastomer employed and the vapor pressure of the liquid being pumped.

316 stainless steel vertical pumps utilize a replaceable coupled shaft using multiple set screws to minimize shaft deflection and misalignment associated problems while allowing the use of standard NEMA motors. They are readily available at most local motor suppliers, thus, saving prolonged downtime and money. Standard elastomers are EPR. Optional viton and PTFE elastomers are also available. A motor stand-off and polytetrafluoroethylene (PTFE) slinger/disk provide optimum bottom motor bearing protection against chemical fume corrosiveness in the Penguin vertical in-tank pump. Single-phase motors are wired for 115 volts using a six-foot cord and grounding plug or for 230 volts using a six-foot cord without plug. All three-phase motors are shipped unwired, whereby the direction of motor rotation must be determined by the end user prior to operation.


Recommended Applications:
• OEMS
• Chemical Wet Processing
• Spray Rinse Pumping
• Wet Processing
• Stand-by Pumping
• Recirculating Pumping
• Fume Scrubbing

• Waste Treatment
• Filtering
• Water Treatment
• Plating/Etching
• Pump Stations
• Transfer Pumping

Features:
• Self-priming when immersed in solution.
• In-tank mounted
• PTFE vapor seal
• Motor stand-off
• Handles solids up to 1/8” diameter
• Added strength of stainless steel

pdf icon Stainless Steel Vertical in-tank Pump Recommended Application

pdf icon Stainless Steel vertical in-tank Pump Installation and Maintenance

 

 

 

 

Stainless Steel Vertical PumpPENGUIN SERIES PT TITANIUM VERTICAL IMMERSIBLE PUMPS are compact and simple in design, having only one moving part, yet highly efficient with proven performance. Because of the unique impeller design in conjunction with no “mechanical seal” or “support bearing” employed, wearing parts are minimized with labor cost and down time greatly reduced. Constructed of industrial grade 2 titanium, these general corrosion-resistant all purpose pumps are ideal for many OEM and chemical wet processing applications – whether you are pumping cleaners, caustic materials, salt solutions, chlorinated solvents, photographic chemicals, de-ionized water, fatty, phosphoric, citric, or lactic acids – we can pump it with confidence. Maximum temperature ratings are primarily dependent on the elastomer employed and the vapor pressure of the liquid being pumped.
Penguin Series PT vertical pumps have a rigid, solid titanium shaft, permanently attached to the rotor drive shaft of the motor without the employment of coupling/set screw assemblies, thus minimizing shaft deflection and misalignment associated problems. One pump size, available 1/2hp through 1 1/2hp, these pumps are versatile, easy to install, require minimal tank space, and can be easily moved from tank to tank.
Standard pump models are equipped with a totally enclosed fan cooled (TEFC) motor. Most motor housings come standard with epoxy coating for added resistance to the chemical corrosion. Standard o-ring elastomers employed are EPR with optional viton and PTFE elastomers available. Single phase motors wired 115 volt are supplied with a 6 foot cord and grounding plug, while those wired for 230 volt are supplied with a 6 foot cord but no grounding plug. Three phase motors are shipped unwired.
The titanium vertical in-tank pump and out-of-tank pump employ a cantilevered shaft, which eliminates employment of any pump bushing or bearing whatsoever, thus allowing these pumps to run dry without damage. Employment of a viton vapor seal assembly provides added bottom motor bearing protection against chemical fume corrosion. Series P titanium pumps may be mounted and operated inside or outside the tank similarly to the Series P plastic vertical pumps.

Recommended Applications:
• Sump and Transfer Pumping
• Spray Rinse Pumping
• Chemical Wet Processing
• Plating and Etching Solutions
• Fume Scrubbing
• Water and Waste Treatment
Features:
• Self-Priming When Immersed
• In or Out-of-Tank Use
• No Bushings or Bearings
• Runs Dry Without Damage
• Viton Vapor Lip Seal
• One Size Fits All
• No Shaft Couplings