SM Spacemaker

Penguin Series SM filter systems are designed to provide a complete, ultra-compact, portable, leakproof filter system. Equipped with the Penguin M Series polypropylene or PVDF magnetic drive pump and the rugged Penguin CPVC or poly-propylene filter chamber. SM filter systems are simple, economical, efficient systems for filtering and circulating acid and alkaline solutions. These include […]

PX Extended

Penguin Series PX extended pump-high flow, are simple in design, efficient in performance, and self-priming when immersed in the solution. With a double impeller design and no seals to leak or bushings or bearings to wear, this pump can run dry without damage while requiring little or no maintenance. Constructed completely of CPVC wherein contact […]

PS Stainless Steel Vertical Pump

Penguin Series PS 316 stainless steel vertical in-tank pumps are compact and simple in design, having only one moving part, yet highly efficient with proven performance. These general corrosion-resistant all-purpose pumps are ideal for many OEM wet processing applications. Whether you are pumping cleaners, caustics, salt solutions, chlorinated solvents, photographic chemicals, deionized water, fatty, phosphoric, […]

Precious Metal Recovery

Penguin precious metal recovery systems are a simple, economical method for reclaiming gold and other precious metals from processing rinse water and drag-out tanks. Up to three toy ounces of precious can be recovered per pound. These units are also effective in producing higher purity rinse water for improved rinse processing re-use. Various pump/chamber combinations […]

PP Pleated Filters

Penguin pleated cartridge filters are an alternative to string wound or spun molded filters. These filters are economical, multi-use, premium quality products that are available in various micron ratings ranging from 50-micron nominal down to .10 micron absolute. Endcap configurations include DOE (double open end, flat gasket) and SOE (single open end, external double 222 […]

PM Tank-Drum Mixers

Penguin mixers are designed to handle a large range of chemicals for both tanks and drums without difficulty. These mixers are completely constructed of 316SS shafts, couplings, and propellers. For a completely metal-less mixer when in contact with the solution, a polypropylene propeller and sleeved shaft are supplied. Choice of the available pumps, bases, mounts, […]

PHF_Vertical-Pump

Our Penguin Series P-HF CPVC vertical pumps are simple in design, efficient in performance, and self-priming when immersed in the solution. With a double impeller design and no seals to leak or bushings or bearings to wear, this pump can run dry without damage while requiring little or no maintenance. Constructed completely of CPVC when […]

PGG Pressure Gage & Guard

The Penguin plastic gauge guard is a compact, molded design consisting of two threaded fluid chambers. There is no possibility of leakage due to uneven screwed components. The choice of materials permits these gauge guards to be utilized on highly corrosive and ultra-pure solutions. Gauge guards are available preassembled at the factory with pressure ratings […]

PF String Wound

Penguin’s wound cartridge filters are manufactured using a high-speed, continuous wind process which creates a superior one-piece filter with hundreds of diamond-shaped tunnels that get progressively smaller from the outer diameter to the core. Finer particles are progressively trapped as fluid travels to the center of the filter allowing for much greater retention capacity than […]

PES Penductor System

Eductors utilize a unique venturi design which enables smaller pumps to circulate larger volumes of tank solution. The eductor can circulate four to five gallons of solution for each gallon pumped. Bulletin PES Penductor System

PE Penductor

Penguin PENDUCTOR's, are efficient space-saving eductor's designed specifically for the process/metal finishing industry for fluid sparging applications. The nozzle design utilizes the same orifice size as a typical 3/8" NPT tank mixing eductor, with a larger connection size, which provides the same flow characteristics with less pressure drop. This can reduce the horsepower required n larger systems. The larger connection sizes allow you to use standard reducing tees without extra bushings or reducing couplings, saving you valuable tank space.

PC Carbon Filter Cartridges

Carbon Filter Cartridges are a one-step carbon and filtration treatment. These cartridges eliminate the problems associated with loose carbon treatment and the need for a separate filtration system. The standard cartridge measures 2 3/4” O.D. with lengths varying from 4” to 40” with flow rates up to 2 1/2 GPM. These cartridges are designed to […]

P_Vertical Pump

Penguin Pumps are designed to handle a large range of chemicals without difficulty. All wetted parts are constructed of CPVC (A), polypropylene (B), or PVDF (C). Series P pumps have an upper working temperature of 180 (A)/150 (B)/280 (C) degrees, respectively, and thus can handle most corrosive, slurries, and abrasive solutions. Series P pumps are […]

Oil Absortion Filter Bag

High-efficiency oil absorption filter bags made of melt-blown polypropylene fiber are typically used to remove oil and other impurities from water or wastewater in industrial applications. These filter bags have multiple layers, which gives them over 90% removal efficiency and significantly increases holding capacity. It is also acid-proof, alkaline proof, and stretch resistant. Bulletin Oil […]

MTDSP Magnetic Self Priming

The MTD-SP is perfect for applications difficult for ordinary centrifugal pumps, such as pumping fluid from below grating, emptying tanker trucks, or rail cars. Transferring liquids from the top of tall bulk storage tanks to reduce the possibility of leaks from sidewall mounted bulkhead fittings, overcoming piping systems that tend to have trapped or entrained […]

MTD Magnetic

Series MTD provides the latest enhanced design changes to seal less magnetic drive horizontal centrifugal pumps. MTD incorporates the strongest magnets made from Neodymium material capable of handling specific gravity to 1.8. The use of this strong material assures trouble-free start-up, hydraulically efficient, and continuous duty performance. Carbon bushings allow the MTD design to ward […]

MR-SR Metal Recovery Chamber

Penguin precious metal recovery systems are a simple, economical method for reclaiming gold and other precious metals from processing rinse water and drag-out tanks. The ion exchange resin is hydrophilic in nature and displays excellent cation exchange resin properties and characteristics in absorbing positively charged metal ions from process streams. Up to three troy ounces […]

MF Magnetic Drive Pump/Chamber System

Penguin MF series filter systems are specifically designed for leakproof filtering and circulating. Equipped with the Penguin M & MTD series polypropylene magnetic driven pump and the rugged Penguin CPVC or polypropylene filter chamber, MF filter systems are designed for continuous trouble-free service. The smaller compact MF filter system is excellent for complete corrosion-resistant filtration […]

Mesh Filter Bag

Nylon Monofilament Mesh bags are typically used to filter solvents, hydrocarbons, and in other applications where more porous filters are needed. Mesh Bag

M Sealless Magnetic Drive

Penguin magnetic driven pumps are corrosion resistant to a wide range of chemical solutions including acids, alkalies, and caustics up to 180ºF. There is no shaft seal. The only moving part inside the pump volute is the impeller magnet/bushing assembly, which rotates on the pure ceramic spindle. Powerful impeller and drive magnets provide full torque, […]

HSC Centrifugal SS Horizontal

Penguin series HSC are corrosive-resistant all-purpose 316L stainless steel pumps ideal for many O.E.M. and chemical processing applications, including most acids and alkalies as well as solvents to 250¼F. The high efficiency of this pump produces up to 90 feet of head. The HSC series pump is widely used for the transfer of non-flammable, non-abrasive […]

HOM Horizontal Centrifugal Polypropylene

Penguin series HOM horizontal centrifugal pumps are designed as an economical alternative for OEM applications that require high flow rates under moderate head conditions with minimum suction lift. A true volute design accompanied by a full diameter impeller creates a highly efficient, energy-saving pump since less horse-power is required. The true volute design eliminates shock […]

Filter Bag

Bag filters are used to trap waste inside the bag, preventing contamination to the liquid that you are filtering. They are easy to use and a relatively low-cost industrial filtration solution. Cartridge filters are another filtration solution that uses modular filters to remove particles from the liquid. Bulletin Filter Bag

Fill Media

Clay-Adsorbs, bonds, and locks contaminants in a chemical bond with no leaching. Designed for a broad line of environmental applications directly related to water treatment (feedwater, process water, wastewater) and water fixation. Bulletin Clay Granular Activated Carbon-Activated carbon filters are generally employed in the process of removing organic compounds and/or extracting free chlorine from water, […]

CTM & CTL Carbon Treatment

Filter Pump Industries offers complete single or dual-chamber systems with slurry tanks for the more contaminated baths requiring a more holistic and aggressive approach to organic removal. Our slurry tank configuration allows pre-coating of the cartridge media (1-3 micron density) with flocculent producing a very tight filter surface to trap and capture the loose powder […]

CT Carbon Treatment

Penguin Series CT carbon treatment chambers use bulk activated granular carbon (GAC) inside re-usable polypro mesh bags in conjunction with post filters to adsorb and reduce organic contaminants from aqueous alkaline and acidic solutions.   Out-of-tank chambers are available in polypropylene, CPVC, or PVDF.  Sizes range from 5 lbs to 60 lbs of GAC with flow […]

CN In-Tank

Penguin Series CN cartridge chambers are designed for the reduction of inorganic particulates from aqueous alkaline and acidic solutions using depth DOE or SOE string wound, melt-blown, or pleated cartridges. CN in-tank chambers are available in CPVC, sizes range from 1-10” to 12-40” cartridges and flow rates to 200 GPM.  Chambers may be mounted in […]

CBK Bag Chamber

Penguin series CBK bag chambers with support cage are designed for the reduction of inorganic particulates from aqueous alkaline and acidic solutions using surface felt and mesh bags.  Out-of-tank chambers are available in CPVC, polypropylene, or PVDF in #1 and #2 sizes and flow rates to 100 gpm.  Chambers may be mounted in parallel for […]

CB_Bag Filter

Penguin filter chambers are designed to handle a large range of chemicals without difficulty. Where in contact with the solution the chambers are constructed of CPVC and Viton elastomers, there is no fragile Lucite or glass. There is no metal to liquid contact. Because of the unique design with heavily reinforced ribbing in the molded […]

C Filter Chambers

Penguin series, 3C/4C/6C/8C &12C, chambers are designed for the reduction of inorganic particulates from aqueous alkaline and acidic solutions using depth DOE or SOE string wound, melt-blown, or pleated cartridges.  Out-of-tank chambers are available in polypropylene, CPVC, or PVDF.  Available in sizes ranging from 1-10” to 12-40” cartridges and flow rates to 200 GPM.  Chambers […]

BF Bag Filtration System

Penguin Series BF open bag filtration systems are designed to provide rapid, high-velocity solution turnover while reducing contaminants' surface load. The high surface area, single-layered, 7” diameter by 16” long bag is equivalent to the workload of 12-10” string wound depth cartridges. A quick disconnect is provided for easy and fast bag replacement. A bag […]

A-SF InTank Suction

The Penguin Series A-SF in-tank suction filtration systems are constructed from CPVC, Polypro, or PVDF with no metal contact. They are corrosion-resistant and designed for continuous-duty operation and virtually trouble-free service. Series A-SF is available in two styles with one or two filters. A choice of filter cartridges is available. Series PF standard string-wound filter […]

A-A & A-B In/OutTank

The Penguin Series A-A and Series A-B filter systems are all-purpose, compact, fully portable, corrosion-resistant, and metalless, and they require no floor space. If desired, both system types can be mounted outside the tank. Unlike one-piece submerged filter systems, Penguin A-A and A-B filter systems need not be removed from the tank for cleaning or […]

A InTank Pump/Outside Chamber

Penguin Series A filter systems are ruggedly constructed and corrosion-resistant. These systems are designed for continuous operation with no metal to liquid contact. The Series A filter system is versatile and easy to install since both the pump and filter chamber are independent units. The Penguin P series pump can be mounted anywhere along the […]

Who We Are

Filter Pump Industries is proud to manufacture all of our products in Southern California. We are continually researching new and innovative technologies to employ into our product lines to give our customers the latest and most cutting edge systems for their specific applications.
LEARN MORE